美國DeFelsko PosiTest G 機械式涂層測厚儀，外觀設計，測量過程中可充分定位，不會發生偏轉問題，只通過前端探頭位置接觸測量面也可定位，無需電池，測量結果可直接讀取，達到涂層厚度時，探頭回彈，V型槽可對圓柱形產品準確定位，不受重力影響，可用于任何地方，隨機提供NIST可追溯證書

產品型號：

更新時間：2024-11-06

廠商性質：代理商

訪問量：2532

產品咨詢 13538187378

產品分類

PRODUCT CLASSIFICATION

無損檢測儀器

鹵素檢漏儀/制冷劑氣體檢漏儀電子天平超聲波測厚儀德國馬爾粗糙度儀便攜式超聲波探傷儀深圳電火花檢測儀埋地管檢漏儀霍爾效應測厚儀美國DAKOTA超聲波測厚儀便攜式硬度計深圳粗糙度測量儀涂層測厚儀磁粉探傷儀測厚/探傷耦合劑

相關文章

2024-09-11

2020-07-17

2016-10-26

2016-02-18

詳細介紹

品牌	DeFelsko/美國狄夫斯高

美國DeFelsko PosiTest G 機械式涂層測厚儀

特點：
精確：
隨機提供NIST可追溯證書
高耐磨碳鋼探頭，保證長時間使用和精確度的連續性
儀表蓋可以打開，方便進行校準
符合美國和標準

耐用：
堅固的外殼，抗沖擊，水，酸，和溶劑
外觀設計*，測量過程中可充分定位，不會發生偏轉問題
只通過前端探頭位置接觸測量面也可*定位
無需電池

使用簡單：
測量結果可直接讀取，達到涂層厚度時，探頭回彈
V型槽可對圓柱形產品準確定位
不受重力影響，可用于任何地方

PosiTest 機械式涂層測厚儀技術參數：
FM：量程： 0-80mils
      精度：±0.2misl ＜4msil
            ±5%讀數 ＞4msil
F ：量程：0-2000μm
      精度：±5μm    ＜100μm
      精度：±5%讀數 ＞100μm
GM:   量程：0-8 mils
      精度：±0.04mils ＜0.8mils
            ±5%讀數 ＞0.8mils
G ：量程：0-200μm
     精度：±1μm   ＜20μm
            ±5%讀數 ＞20μm

PosiTest magnetic pull-off thickness gage for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing, metalizing, plating, etc.) on steel.

Certificate of Calibration showing traceability to PTB included with every gage
Matching Calibration Standards and Procedures available for every model
Highly wear resistant Carbide Probe for longest life and continuous accuracy
Remove center of dial cover for easy calibration adjustment
Conforms to national and international standards

Extra rugged housing, not affected by mechanical shock, water, acid or solvents
Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement
Can be used fully supported or with only the front probe area contacting the surface
Functions on a permanent rare-earth cobalt magnet
No batteries/electronics
2 year warranty

Easy To Use

Positive visual and audible indicators to designate when
thickness reading is established
“V” grooves in probe housing and Gage base allow correct
positioning on cylindrical objects
Compact, lightweight, precisely balanced, independent of
gravity – can be used in any position
GO/NO-GO button can be pre-set for rapid measurement
Probe contact and dial rotation all in a one-finger operation
Furnished with wrist strap and instructions in a high quality
leather case with belt loops for your convenience

Easily measures small parts of almost any shape